Mechanical ventilation

0423 394 584

Mechanical Ventilation is used to control indoor and outdoor air quality. It removes fumes, odours and heat and introduces fresh air into an enclosed space.

  • Bathrooms, Toilets & Laundries
  • Commercial Kitchens
  • Car Park & Basement Ventilation

Air Temp Co can manufacture and install commercial ventilation systems, including:

Stainless steel range-hoods

Fan motors

Filtration

Duct work

     

     

    What We Do

    Stainless Steel Range Hoods

    Properly functioning range hoods remove heat and contaminants produced during the cooking process and reduce the risk of food contamination. A correctly designed and built range hood will promote air quality by effectively the cleaning air and will ensure a reduction in fire hazards.

    We design, manufacture, deliver and install all exhaust hoods. All hoods are made from high quality stainless steel and comply withAustralian standards.

    • Kitchen exhaust hoods:
    • Low back
    • Wall mounted
    • Single island
    • Double island
    • Pizza oven
    • L shaped hoods
    • Dishwasher hoods

    All kitchen exhaust hoods will be fitted with approved grease filters and with fluorescent lights if required.

    We offer a free on-site inspection, measure and quote

    Fan Motors

    Vertical Discharge Fan

    Designed for use in commercial kitchen exhaust installations as well as applications requiring vertical discharge.
    Features:
    • galvanized steel construction
    • backward curved centrifugal impeller
    • controllable speed
    • can discharge up to 2400 L/S at 400pa
    • single phase or 3 phase
    • compliance with Australian Standards

    Inline Duct-mount Fan
    Features:
    • full steel construction
    • direct drive centrifugal impeller
    • single phase or 3 phase
    • controllable speed
    • can be used for supply or exhaust systems
    • can be mounted vertically or horizontally
    • performs up to 3200 L/S at 200pa
    • compliance with Australian Standards

    Filtration

    The purpose of kitchen exhaust hood filters is to distribute and extract fat and grease.

    Honeycomb Grease Filter

    Honeycomb Grease Filters are used mainly in the cooking Industry for the removal of grease and oils from the range hood. When the grease laden air passes through the filter, the air changes direction. The grease clings to the surface and clean air passes through which prevents grease form entering the exhaust system.

    Honeycomb filters are made from high grade aluminium throughout. The filter media is made from aluminium foil. The foil when placed side by side will form a curved honeycomb channel. The frame is made from aluminium extortion. All frames have drain holes to help the cooking fat drain into the range-hood.

    All filters are fitted with handles and are fully washable. All standard sizes are available.

    Grease filters should always be installed with the honeycomb media running vertically and the face of the filter at an angle to the horizontal of no more than 30 degrees to the vertical to enable excess grease and oil to correctly drain from the filter into collection channels.

     

    Flame Stop Baffle Filters

    Baffle Grease Filters are designed to prevent flames travelling from the cooking area up into the extraction duct and are an effective and durable option for extracting grease from cooking vapours.

    Baffle filters cause the air to change direction which catches the grease partials, the captured grease drains down the baffles and into a collecting trough, unlike other grease filters that trap and hold the grease until cleaned.

    Fully washable and will handle all cleaning products without discolouring and will outlive all other types of exhaust hood grease filters, strong durable frame with fold away D-handles and available in stainless steel or aluminium, depending on expected temperature levels

     Pleated Panel Filters 30/30

    A Primary filter for ventilation systems, this is a high performance disposable pleated panel filter delivering clean air to kitchens. Fully washable and cost effective to replace when required.

    These filters are incorporated in our Supply Air Systems.

    The combination of the unique replaceable; media, beverage board and pleating technology makes the 30/30 a low-energy top performing product. Featuring a water resistant cardboard frame, girders/crossbars with diagonal stiffener stuck to media to keep the spacing of folds and protect and maintain the filter and fully supported media bonded onto a wire support grid. The Rounded pleats ensure maximum capacity of dust retention and facilitate airflow through the media

     

    Electrostatic Filters

    Electrostatic filters work by drawing the air in through the system using an exhaust fan. The larger particles such as dirt and oil are trapped by the mesh filter. The remaining minute particles pass through an ionisation section. It is in this section where they obtain a positive charge.

    UVC Ozone Emitters

    In-duct UV lamp for grease particle treatment and odour mitigation of light commercial kitchen or residential kitchen exhaust.

    Duct work

    We manufacture, deliver and install various air ducts for commercial purposes, our services include:

    • Rectangular ducts
    • Stainless Steel ducts
    • Sub ducts
    • Duct boards
    • Plenum boxes
    • Roof Cowls
    • Hanging Straps
    • Plinth Frames
    • Pipework covers
    • Fold Angles

    Duct Work

    We manufacture, deliver and install various air ducts for commercial purposes, our services include:

    • Rectangular ducts
    • Stainless Steel ducts
    • Sub ducts
    • Duct boards
    • Plenum boxes
    • Roof Cowls
    • Hanging Straps
    • Plinth Frames
    • Pipework covers
    • Fold Angles

    Get Started

    Details

    0423 394 584

    Unit 22, 89 Gow St, Padstow,NSW, 2211

    WordPress Lightbox